Agglomerated cork flooring underlay roll, 1 × 10 m, 2 mm, 10 m²

Product description

The 2 mm agglomerated cork roll can be used as an intermediate layer beneath compatible flooring. Cork creates a separation between the substrate and floor covering, helping to reduce footstep noise and improve thermal comfort.

It is suitable for interior fitting or renovation projects requiring an underlay beneath laminate flooring, engineered wood flooring or other coverings that allow cork. The roll can be measured and cut to fit the room.

The product is also presented for indoor wall insulation applications; for this use, choose a fixing and finishing system suited to your project.

At a glance

• Agglomerated cork roll for indoor use.
• 2 mm thickness.
• Dimensions: 1 m wide × 10 m long.
• Nominal area: 10 m²/roll.
• Can help reduce impact noise.
• Can be cut to fit the dimensions of the space.

The cork layer can help reduce impact sounds transmitted through the floor.

Cork adds an intermediate layer between the flooring substrate and floor covering.

The 1 × 10 m roll allows the material to be measured and cut to suit the room.

Where can it be used?

• Beneath compatible laminate flooring.
• Beneath compatible engineered wood flooring.
• As an underlay in flooring systems that allow cork.
• In certain interior wall insulation applications, with appropriate installation.

Before installation

Check the recommendations for your chosen flooring and substrate preparation. For underfloor heating, check the permitted thermal resistance of the complete build-up according to the system instructions.

The roll is 1 m wide and 10 m long, giving a nominal coverage of 10 m². Allow for cutting waste when calculating your final requirements.

Yes, if the flooring instructions allow a 2 mm cork underlay.

Compatibility depends on the heating system requirements and the total thermal resistance of the installed floor.